Bolthold eAK4 Asphalt Anchor Kit w/ 4 SP10 & Epoxy Grout

The Bolthold eAK-4 kit provides you with the correct amount of anchors and grout for securing anchors into asphalt. The included SP10-38 anchors are ideal for anchoring bike racks, signs, machinery, and more into asphalt surfaces. The SP10-38 asphalt anchor requires a 7/8″ hole that is 6″ deep. The length of the bolt inside the anchor should not exceed 3″. Each anchor is pre-installed with a 1″ long hex bolt and a 1″ diameter washer.

You can load the anchors at 80% of their pull rating if the object/structure stands solidly by itself. If the object applies a static pull force on the anchors just as it stands, limit the load to 20% of the pull rating.

Asphalt Anchor Features:

• Asphalt Anchors are mounted flush with the surface.
• A 1.4″ header at the top of the anchor prevents the anchor from dropping below the surface and being pulled up into the mounting plate once the bolt is tightened.
• The attach