Standard Duty Commercial Cylindrical Entrance Door Knob Locksets – Barrington Ba Grade 2 – Multiple Finishes Available – Entrance/Office Lock with Deadbolt | Satin Chrome | 3-3/4″

Product Specifications:

• Standard Duty Cylindrical Entrance Locksets
• Barrington BA Series Grade 2
• Quality designed and engineered for Commercial Buildings
• ANSI Standards: Meets or exceeds requirements of BHMA/ANSI A156.2 series 4000 for grade 2 (FF-H-106C).
• Cylinder & Keyway: 6 pin solid brass C keyway, Schlage E, Schlage C-K,
• Interchangeable Core: Not Available
• Door Range: 1 3/8″ to 1 3/4″ thick
• Strikes: ANSI strike standard, 4 7/8″ x 1 1/4″
• Bore Diameter: 1″ for latch; 2 1/8″ for lock housing
• Latch Faceplate: 2 1/4″ x 1 1/8″ for 2 3/4″ backset, 2 1/4″ x 1″ for 2 3/8″ backset
• Exposed Trim: Wrought brass, bronze or stainless steel

Product Options:

• Type:
• Entrance/Office Lock: Turn / Push button locking. Pushing and turning button locks outside knob requiring use of key until button is manually unlocked. Pushing button locks outside knob until unlocked with key or inside knob is turned.
• Entrance/Office Lock with Single Cylinder Deadbolt: 2 Packed Together: Turn / Push button locking. Pushing and turning button locks outside knob requiring use of key until button is manually unlocked. Pushing button locks outside knob until unlocked with key or inside knob is turned. Dead locking latch bolt retracted by key from outside or by thumb turn on inside. Adjustable 2 or 2 backset.
• Finishes Available: Satin Chrome, Polished Brass, Oil Rubbed Bronze, Satin Nickel
• Backset: 2-3/4″ Inches (standard), 2-3/8″ Inches, 3-3/4″ Inches, 5″ Inches